Aron Alpha Accessories

We offer a wide range of accessories to further enhance the usability of Aron Alpha.

Product Name

Aron Alpha Accessories

Features

Our lineup of accessories, including primer for hard-to-adhere surfaces, curing accelerator for reducing adhesion time, and peeling liquid for removing adhesion from surfaces, are available to enhance the usable of Aron Alpha.

Usage

Bond materials that are hard-to-adhere using Aron Alpha alone.

Specifications

Aron Alpha Specific Primer

Bond hard-to-adhere materials and increase the usability of Aron Alpha.

Choose the right primer for the type of adherend suited to your application.

Grade Adherend
PP PRIMER PP, PE, olefin elastomer, etc.
aa・Glass primer Glass
aa・Silicone rubber primer Silicone rubber

PP PRIMER

Adherend Adhesion time (seconds) Tensile shear strength (N/mm2)
No primer With primer No primer With primer
PP 300 and above 3 0.3 5.0 (material destruction)
PE 300 and above 3 0.3 3.0
EPT rubber 7 2 0.5 2.0 (material destruction)

*Bonding primer-treated material with Aron Alpha201

Directions

Pre-soak primer with absorbent cotton or felt, and wipe the adhesion surface one or two times. Bond using Aron Alpha once the primer has dried. If the primed surface is left without adhesion for a long time, the performance may not be evident due to factors such as temperature and humidity. Be sure to bond the primed adherend as soon as possible.

Aron Alpha Specific Curing Accelerator

A curing accelerator for Aron Alpha . that reduces adhesion time.

Grade aa Setter aa Setter DM3 aa Accelerator aa Accelerator 2
Solvents Alcohol Acetone Acetone Alcohol
Containers Can Bottle Spray can Spray can

Ideal for the following applications

  • Prevent whitening on the periphery of the adhesive.
  • Fill crevices or heaped adhesion.
  • Rapidly cure Aron Alpha.

Directions

[When treating before bonding]・Soak a cotton ball or sponge with aa-setter and wipe the surface opposite to the side to which the adhesive is to be applied once or twice.・Soak the adherend in the container containing the aa-setter, dry, and then adhere. [When processing after bonding]・Apply a drop of aa-setter or aa-accelerator to the adherend. Or, spray aa accelerator on the coated area.・Place the adherend in the aa-setter atmosphere.

Aron Alpha Specific Peeling Liquid

Use for the removal of hardened materials, peeling of adhered parts, and treatment of whitened parts around the adhesion.

Inquiries

Department in charge
New Products Development Div.